How To Enable Camera Windows 7

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Actions

HP Notebook, Affect, and AiO PCs - Webcam Troubleshooting (Windows 7)

This document is for HP computers with built-in webcams and Windows vii.

Some HP notebooks, Touch, and AiO computers come with preinstalled webcams that tin can be used to capture video movement or yet images. A webcam is a video input device, similar to a scanner or camera, and does not work unless y'all have software that works with your webcam hardware. The 2 most common types of software that use webcams are Internet messaging software (for making video calls over the Internet), and video editing software (for creating and sharing video files).

Use one of the following sections that best describes your state of affairs.

Can't detect the webcam or webcam software

Are you not sure how to get the images from the webcam into Windows? Are you not certain if your calculator has a webcam?

Step ane: Looking for webcam hardware

Take a quick moment to visually inspect the top of your estimator'south display. Look closely, you lot should see a small lens in the peak center if your estimator has a webcam. Some models practice not come with a webcam and the surface area where the webcam would usually reside is replaced past a small plastic plug. Often, at that place are pocket-size holes near the top center of your display. These holes are for the microphone or other sensors and do non incorporate a webcam.

• If your computer does non have a built-in webcam, you must use an external USB webcam.

• If your reckoner has a congenital-in webcam and you cannot apply it, continue to stride 2.

Step 2: Finding and using the Webcam software that came with your computer (Windows seven)

If your computer came with a born webcam, HP has pre-installed software that you can utilise to record and share webcam video. Detect the software products on your computer every bit follows:

1. Click Start, blazon Device Manager in the search field, and so select Device Managing director from the search results list.

2. Double-click Imaging devices.

3. Click the name of the webcam software from the search results list. If the name of your webcam software does non appear in the search results list, endeavour searching once more using one of the other names.

   • If you lot cannot find and open the webcam software for your computer, then continue to the next step.

   • If you found webcam software, information technology opens, and you can see an paradigm, then yous are finished. Your webcam is working.

   • If you plant webcam software, it opens, but you cannot come across video in the principal display window, restart the figurer and try once more. If the problem persists, use the troubleshooting section Video does not appear in webcam software.

Video does not appear in your webcam software (such as YouCam, Skype, Messenger, etc.)

You can open webcam software, such equally YouCam, Skype, or Live Messenger, but video does not appear in the master viewing window. Utilize the following steps, in the order they are presented, until webcam video appears in your webcam software or it has been determined that the figurer requires service:

Step 1: Making sure the webcam is the selected video/capture device

Your webcam must be selected as the video capture device in your webcam software. If the computer has multiple video input sources, your webcam software might be continued to something other than your webcam.

To select the webcam every bit your video source, open your webcam software and wait for video camera, video source, or video caption in the software's properties or preferences. Hither are some common examples of selecting the webcam as the video source:

note:

The name of your webcam displays every bit USB Video Device, HP Webcam, USB 2.0 Camera, HP Pavilion Webcam, or something similar. If y'all do not know the name, select a proper noun to see if video displays. If not, endeavor selecting other video device names until you see the video from your webcam brandish in the window.

Using your webcam with Cyberlink YouCam

Follow these steps to utilise your webcam with Cyberlink YouCam:

1. In YouCam, click the Configure icon .

2. Select the proper noun of your webcam from the Capture Device driblet-down listing.

   

3. Select OK to accept the selection. Exit and restart the YouCam application to view an image.

Using your webcam with Skype

Follow these steps to use your webcam with Skype:

notation:

These steps are for Skype version 5. The version on your computer might be dissimilar.

1. In Skype, click Tools, and and then click Options.

2. Click Video Settings from the left side of the folio.

3. Select the name of your webcam from the Select webcam list.

   

4. When the video displays in the pane, click Save.

Using your webcam with Windows Live Messenger

Follow these steps to use your webcam with Windows Live Messenger:

1. In Live Messenger, click the pointer icon on the Windows Alive Messenger toolbar.

2. Click Tools, and and so click Audio and Video Setup.

   

3. Click Next.

4. Select the name of your webcam from the drop-down list.

   

5. Click Finish.

Video should display after selecting the webcam as a source. If not, continue to the next footstep.

Pace 2: Restarting the figurer to correct webcam problems

The webcam may be associated with another software program or non responding. Often, restarting the computer tin can correct the problem. Restart the calculator and open your Webcam software as soon as Windows finishes loading.

If restarting the reckoner does not correct this problem, go on troubleshooting.

Stride 3: Updating or irresolute the webcam driver in Windows 7

Some software applications crave updated drivers for your webcam to display video or they might need a more basic commuter. Use the post-obit steps to change the commuter for your webcam:

2. If a Let'southward identify your product to get started folio displays, click Laptop or Desktop.

   The product support folio opens.

3. Type the model name for your calculator in the Or, enter your serial number field, so click Submit. For example, type Pavilion HPE h8-1360t Desktop, so click Submit.

   

4. If a Matching products webpage opens, select your model number from the listing.

5. The software results folio for your computer displays with the default operating system selected. If you lot need to change the operating system, click Change, select your version, and then click Change.

   note:

   If y'all cannot detect the operating system y'all desire in the list, HP does not have drivers for that operating system.

   

6. From the list of available software and driver categories, find the webcam commuter.

   • If a webcam driver update is available from HP, download the file to your calculator and install the software according to the instructions on the webpage. Afterwards updating, restart the computer, and then effort using your software once more. If the problem persists, continue using these steps to install a generic Windows USB video driver.

   • If a webcam driver is not available from HP or you lot cannot admission the Cyberspace, go along using these steps to install a generic Windows USB Video driver.

7. Click Showtime, type Device Director in the search field, and select Device Manager from the search results list.

8. Double-click Imaging Devices to expand the list of webcam drivers.

   

   • If in that location is no imaging devices category listed in Device Manager, stop using these steps and see the section Webcam is non listed in Device Manager in this document.

   • If more than one webcam driver is listed, right-click the driver and select uninstall for any driver that is non the HP Webcam-101 or Microsoft USB Video Device driver. Once the other drivers have been removed, restart your computer and open your software. If problems persist, keep using these steps.

9. Right-click the proper noun of the webcam in the Images Devices category (HP Webcam-101 or Microsoft USB Video Device), and select Update Commuter Software.

10. Click Browse the estimator to select a specific USB Video Device driver.

11. Double-click Imaging Devices to expand the list of webcam drivers, right-click the webcam commuter, and so select Properties.

    

12. Brand a annotation of the existing proper name of the webcam driver (Example: HP Webcam), as it might alter after the update.

13. On the Webcam Properties window, select Update Commuter....

14. When prompted, select the selection to Browse the computer for desired driver.

15. When prompted, select the Let me selection from a list of device drivers on my reckoner option.

16. Remove the selection from Show compatible hardware, select Microsoft in the Manufacturer pane, and select USB Video Device in the Model pane.

17. Click Next to install the webcam driver.

18. Permit the installation of the USB Video Device, so click Close.

19. After the device has been updated to USB Video Device in Device Director, restart your computer and open the software. If problems persist, install the latest BIOS update from HP and get all the latest Windows 7 Updates from Microsoft.

Webcam is not listed in Device Manager (Windows seven)

The drivers for the Imaging devices, which include the webcam, are not displayed in the Device Managing director. To resolve this problem, use the following steps:

Video overview

1. Close down your computer, and disconnect the power string.

2. Remove the battery from the bombardment compartment. If your reckoner has a sealed battery that cannot exist removed, then perform a reset. Go to HP Notebook PCs - How to Power Reset your Laptop​ for more information.

3. Press and concur the power button for ten seconds, and then reinsert the battery and reconnect the power cord.

4. Turn on the computer and await for Windows to open up.

5. Click Commencement, type Device Manager in the search field, and select Device Manager from the list provided.

6. If at that place is no Imaging devices category listed, select Action, then Scan for hardware changes.

   

7. If Device Managing director does not recognize the webcam after the scan, Utilise Microsoft Organization Restore to become back to a time when the Webcam was working properly. If problems persist, the webcam might accept become unplugged internally and requires service.

Webcam stopped working after a Windows update

A webcam that was working in one of the pre-installed programs suddenly stops working after doing a scheduled Windows Update or after doing a recommended update to YouCam or Media Smart.

To resolve this issue, reinstall the original HP Webcam-101 or Microsoft USB Video Device commuter.

1. Click Start, type Device Manager in the search field, and select Device Manager from the list.

2. Double-click Imaging Devices to expand the list of webcam drivers.

3. If the HP Webcam-101 or Microsoft USB Video Device is listed, right-click the driver and select Update Driver Software and follow the on-screen instructions.

4. Restart your computer, open your webcam software and try viewing again. If the trouble persists, use Microsoft Organisation Restore to go back to a fourth dimension when the webcam was working properly.

Installed other webcam programs and webcam does not work

Installation of multiple webcam drivers and programs might cause conflicts. If y'all are using more than one software program to use your webcam, such as Skype for instant messaging and YouCam for saving videos, then make certain just one program is open when using the webcam. Practise not attempt to open both programs at the same time and close your webcam software when you are done. Information technology is a good idea to wait v to 10 seconds after closing webcam software, earlier opening another webcam software plan.

Simply restarting the calculator tin resolve most software conflicts. If problems persist, uninstall one of the webcam software titles and reinstall the software you want to utilize.

Webcam epitome quality problems

The webcam works, but the epitome is not bright or the video is inclement.

The first thing to practice is make sure your video recording environment has good lighting. Adjacent, accommodate the image quality using the adjustments available from the webcam software. About webcam software allows you to conform quality settings for dissimilarity, colors and brightness. To resolve problems with choppy playback, reduce the size of the video image from the software settings, use a loftier speed Internet connection (for Instant messaging), and do non use other loftier speed USB devices at the aforementioned time yous are using the webcam.

Reinstalling the original webcam program that came with your computer in Windows 7

If your computer came with a born webcam, HP provides software that y'all tin can utilise with your webcam. If this software program was removed, you tin reinstall it using HP Recovery Manager as follows:

notation:

If the operating system on your computer was upgraded, these steps practise non work. Instead, you demand to download and install webcam software from HP or the Net.

1. Click Get-go, type Recovery in the search field, and select Recovery Manager from the search results list.

2. Select Drivers and Applications Reinstall.

   

3. Select the advisable Software program (such as Cyberlink YouCam or MediaSmart), and select Install.

   

Disabling the webcam in Windows 7

To disable the webcam then that it cannot exist used, disable the device in device manager equally follows:

1. Click Start, type Device Managing director in the search field, and and then select Device Manager from the search results list.

2. Double-click Imaging devices.

3. Right-click the proper name of the webcam and select Disable.

   

4. Click Yes on the message that warns that the device volition terminate operation.

5. To ensure that your webcam has been disabled, open the webcam software, such as YouCam, to see if video withal plays. If an error occurs stating that an imaging device could non exist found (or similar), you are done. If video still displays in your webcam software, the wrong imaging device was disabled. Repeat these steps to disable your webcam.

   notation:

   To re-enable the webcam, repeat these steps but select Enable instead of disable.

Source: https://support.hp.com/id-en/document/c02452221

Posted by: caponesquiter.blogspot.com

Share this post